mezcal

Monkey Business: What’s a Chango Mezcalero?

These cheeky monkeys are used to market and store mezcal. We investigate their origins and where to buy changos mezcaleros. 

Brightly painted changos mezcaleros, ceramic monkey-shaped containers for mezcal

What’s more fun than a barrel of monkeys?! A chango filled with mezcal!

Monkeys. They’re cute but erratic — just how I imagine myself when I’ve had too much to drink. So it’s no surprise that these primates have come to symbolize drunkenness in Mexico. You could say that monkeys are the spirit animal of mezcal.

Vintage red and white painted chango mezcalero with "Recuerdo de Oaxaca Hector" on the back

Some changos were given as souvenir gifts, as you can see from the hand-painted one above.

What is a chango mezcalero?

These monkey-shaped clay receptacles are really just a clever marketing scheme used to sell mezcal. They hold a liter or so of the potent potable Oaxaca is known for. Most changos are brightly painted and depict monkeys in goofy positions — covering an eye, clutching bananas, holding a snake, playing the guitar. Some were marked, “Recuerdo de Oaxaca (Souvenir of Oaxaca)” or had the name of a couple to be given as a wedding present. 


Very young boy and horse at mezcal distillery in Oaxaca, Mexico

Black and white photo of Valente Nieto, Rosa Real and Juventino Nieto by their pottery in 1950

Juventino Nieto (far right) with Rosa Real and their son Valente stand among their pottery creations. Don Juventino might have been the one to create the first chango mezcalero.

Who created the first chango mezcalero?

It’s surprisingly difficult to find out much about these whimsical folk art containers, and there’s a controversy about who invented them. One family from a village outside of Oaxaca insists it was their forebear, Marcelo Simón Galán, who came up with the idea, while another family says it was their ancestor, Juventino Nieto, who did so. Both men are dead, so they can’t even duke it out among themselves. 

(Incidentally, Nieto was married to the late Rosa Real, who’s credited with devising the black pottery technique that Oaxaca is now famous for.)

There are claims that other artisans from other parts of Mexico came up with changos as well. I’ll be a monkey’s uncle — we may never know who actually invented these primate pitchers. 

Mold used to make chango mezcaleros

These ceramic containers are created using a mold like this one.

When were changos first made?

Some say changos mezcaleros date back to the mid-1800s. But a mold used to create changos by Nieto in the village of San Bartolo Coyotepec has the date 1938 written on it. 

Changos mezcaleros, painted ceramic containers shaped like monkeys to hold mezcal

These fun monkey-shaped containers were used to market mezcal. With the liquor’s newfound popularity, perhaps changos will make a comeback!

Are changos mezcaleros still made?

Yes. There are at least three workshops in the pueblo of Santiago Matatlán that have produced changos mezcaleros for decades. Makes sense: Matatlán is home to the highest number of family-run mezcal distilleries, or palenques. 

Where can you buy changos?

There’s always the internet, of course, with sites like eBay offering vintage changos mezcaleros. But despite there being a good chance the mezcal containers originated in Oaxaca, we couldn’t find any there. It wasn’t until we visited San Miguel de Allende that we came across a couple stores that sold them: Origenes Antigüedades Populares across from the Centro Cultural Ignacio Ramírez “El Nigromante” and Casa Michoacana, a folk art emporium on Calzada de la Aurora. 


Duke and I were so excited to see changos for sale, we of course had to bring one home with us. We got this cheeky monkey for just under 2,000 pesos, or about $100. Not sure if we’ll ever fill him with mezcal, though. –Wally

How Is Mezcal Made?

What is mezcal? Here’s the process to create this artisanal alcohol that’s gaining in popularity — and giving tequila a run for its dinero.

Horse and fermentation vats to make mezcal

A horse, agave and giant barrels are all used to make the popular beverage mezcal.

I can’t quite remember the first time I tried mezcal. It was most likely mixed into a cocktail at a restaurant somewhere in Chicago. I vividly recall it being intense. In fact, when I recounted this memory to Alvin Starkman of Mezcal Educational Tours, I believe my exact words were, “It was like sitting in front of a campfire blowing smoke in my face.” 

It wasn’t until our first trip to Mexico City in 2018 at Los Danzantes, a restaurant in Coyoacán, that I drank a joven espadín, an unaged mezcal, from a veladora, a clear fluted glass with a cross engraved on its bottom, that it all changed for me.

As strange as it may seem, mold is a part of the process — and a factor in mezcal’s taste.

Wally had learned about Alvin in the useful travel guide Viva Oaxaca by Robert Adler and Jo Ann Wexler. He reached out to Alvin to arrange a day trip for us.

When Alvin picked us up at our hotel, he started our education by sharing his backstory. Oaxaca, which began as a favorite destination in 1991, drew him and his wife back, until they bought a parcel of land in the Sierra Madre mountains, built a house and relocated permanently from Canada in 2004. Like my father, Alvin enjoys scotch and found a similar appreciation in mezcal. 

Authenticity is of utmost importance for Alvin when he gives his tours. “The day is not pre-planned for the tourist trade, meaning I never know who will be at what stage of production where and when — the objective being to illustrate as much as possible as it is happening,” he says. 

Agave fields in state of Oaxaca, Mexico

Palenqueros (mezcal artisans) often grow their own agave, though many supplement it from other farms.

The word “mezcal” is the generic term for spirits made from the roasted heart of the agave (referred to locally as maguey) — the same plant used to make Mexico’s biggest export, tequila. It derives from the indiginous Náhuatl words metl (agave) and ixcalli (baked). However, unlike tequila, the agave must be roasted to be made into mezcal. It can be produced from a dozen different varieties of agave, each with its own character and subspecies, including but not limited to espadín, arroqueño, madrecuixe, tepeztate, tobasiche and tobala. 

Alvin Starkman guides a tour of palenques by a stack of roasted pinas

A tour with Alvin Starkman of Mezcal Educational Tours will show you the various steps of the mezcal-making process in action at a variety of family-run palenques, or distilleries.

Harvesting Piñas: The Heart of the Matter

Oaxaca’s Central Valleys currently have the highest concentration of traditional producers, known as palenqueros, who distill the spirit in palenques alongside their other crops and farm animals. 

After eight to 30 years — the period of time it takes for an agave to reach maturity, farmers known as jimadors use machetes to cut away the sword-like pencas (leaves) and use a coa, a specialized tool to extract the piña, or heart of the maguey. The leafless piña looks like an overgrown pineapple. 

Piña of agave at mezcal distillery

The heart of the agave plant, the piña, is a key ingredient in making mezcal and often looks like a giant pineapple or pinecone.

Baking the Piñas: Where There’s Smoke There’s Fire

Once the piñas have been harvested and taken to the palenque, a deep earthen pit is filled with firewood and lit. A layer of rocks is placed on top of the burning wood, and after about five or six hours, are as hot as they’re going to get. 

The piñas are piled into the pit oven by size, the largest at the bottom and the smallest on top. A layer of bagasse, the damp fibrous byproduct that remains after the piñas have been crushed and had their liquid extracted (but more on that later), gets added to insulate the piñas from the hot rocks.

Pit used to roast piñas to make mezcal

Mezcal’s smoky flavor should come from slow-roasting piñas in a pit like this.

Wooden cross to bless mezcal-making process

According to our guide, Alvin, “If you’re a good Catholic, you’re going to stick a cross on top of the mound to ensure your piñas produce a good yield and good flavor.”

The hearts are covered with agave leaves, straw mats, grain sacks and dirt piled high to form a kind of volcano. Water is then poured into the opening at the top of the mound to release the smoke trapped inside the oven, and the piñas are left to slowly roast underground for several days. This allows the heat to convert the carbohydrates into sugars.

Roasted piña at palenque to make mezcal

A roasted piña, before it’s chopped up and mashed

Mashing the Piñas: Beaten to a Pulp

After they’re caramelized, the pit-roasted piñas are removed and left to cool.

As strange as it may seem, mold is a part of the process — and a factor in mezcal’s taste. “The longer it stays out, the moldier it’s going to get,” Alvin tells us. “Sometimes the mold is green, sometimes it’s yellow, sometimes it’s orange. So the mold is also going to impact the flavor.” They are left to rest between eight days to a month. 

Man raising machete to chop piñas to make mezcal

A man chops up roasted piñas to get crushed. Alvin says farmers from Oaxaca practically grow up with a machete in their hands.

Pile of roasted piñas from agave at mezcal distillery

Roasted piñas sit around for up to a month to get a nice flavorful mold on them.

The palenquero hacks the roasted piñas into smaller pieces, which are transferred to a stone pit, where they are laboriously crushed by hand using a cartoonishly large wooden mallet, or by a tahona, a large stone wheel pulled around a circular pit by a donkey or horse. 

Guide Alvin Starkman holding a tahona used to crush piñas to make mezcal

Alvin holds a large wooden tool used to crush roasted piñas.

A man leading a horse to use a stone to crush piñas to make mezcal

Another option to crush piñas is to lead a horse attached to a massive stone tahona around and around a setup like this.

Young boy with horse crushing pinas at mezcal distillery in Oaxaca

Palenques are family-run affairs — and they start the kids young. This adorable fella helped encourage the horse to walk the giant tahona around.

Once the piñas are sufficiently pulverized to a mash, the roasted pulp and nectar are transferred into a wood vat. The dry, fibrous leftovers (the bagasse previously mentioned) can be used to make adobe, fuel or mulch — or to insulate roasting piñas for another batch of mezcal.

Large vats fermenting agave to make mezcal

Large wooden vats hold the mashed piñas and the extracted juices as they ferment.

Fermentation: Yeasty Beasties 

The sweet mash and its juices are shoveled into large open-air wooden tubs or vats. Water is slowly added, and as the mixture interacts with naturally occurring airborne wild yeasts and bacteria, fermentation starts. 

“Traditional mezcal makers use river water, mountain spring water or well water,” Alvin explains. “A well is fed by underground streams that come from different directions at different times of the year. So the water quality with traditionally made mezcal is always different and is integral to the final product’s quality.”

Wooden vat of fermenting piñas to make mezcal

The vats are topped with bagasse, fibrous straw-like leftovers from agave cultivation, and left to ferment naturally over the course of three days to two weeks.

As the sugars break down the mash, the brew begins to bubble. The palenquero stirs it, and eventually the bubbling subsides, leaving a brown crust that looks like maple sugar candy on the surface of the vat. Depending on the season, the altitude and the temperature, this can take anywhere from three days to two weeks fully ferment. Once it has 3% to 5% alcohol content and looks, smells and tastes like apple cider vinegar, it’s ready to be distilled. 

Water pours into a pot sealed atop a larger container to distill the alcohol that will become mezcal.

Distillation: Good to the Last Drop 

Distillation is the process in which alcohol is concentrated via evaporation under heat and pressure. The goal of distillation is to separate the desirable elements (alcohol) from water as they recondense into liquid. 

Mexico’s pre-Hispanic society was already familiar with a variety of fermented beverages, including the maguey-based pulque. The arrival of Filipino sailors in the 16th century introduced the indigenous peoples to the clay still, while the Spanish colonizers brought with them the knowledge of copper alembic stills in the 17th century. 

Mezcal distillation stills at palenque in Oaxaca

Maestro Felix Ángeles Arellanes’ palenque in action

The first stop on our tour with Alvin was Santa Catarina Minas, south of Oaxaca de Juárez, at the palenque of Maestro Felix Ángeles Arellanes. It was a great glimpse into the process. There the fermented liquid and mash is added to a barro de olla, a cauldron-like clay pot that has been fitted into a masonry oven. A second pot, which is open at the top and bottom, is placed over the mash-filled olla and sealed with the maple candy-like goo and bagasse to prevent any steam from escaping. Above and behind all this is a pipe with a spigot. 

A wood-burning oven below a mezcal distillation setup with an olla

Embers glowed in the stone masonry ovens beneath, as tendrils of smoke plumed above the tops of the clay pot stills. This step needs to be closely monitored, as the temperature the spirit is distilled at directly impacts the quality and flavor of the mezcal.

A fire is lit below, the spigot is turned on, and a running stream of cold water fills a metal cooling pan fitted into the mouth of the top pot. In the bottom pot, the fermented mash slowly boils. The alcohol vapors rise, and when they come into contact with the cool bottom of the pan, they condense and form droplets. These fall into a carrizo cane, a hollow reed tube, and are collected in a container. This is the first distillation, often referred to as shishe or común. 

Wally and I sampled the distillate directly from the still in a jicara, a hollowed-out gourd bowl traditionally used to serve mezcal. Alvin explained that this was the punta, or the head. Suffice to say, it was potent, at 70% alcohol by volume. 

Copper mezcal distillery

Another technique to distill mezcal is to use copper instead of olla pots.

Traditionally made mezcal is distilled twice, and occasionally three times, until the ABV is reduced to 40% to 50%. 

Ollas used during the mezcal distillation process

When they’re not in use, Maestro Felix Ángeles Arellanes typically tops the ollas with old metal discs from retired plows. He doesn’t want his chickens laying eggs inside. 

We would go on to sample 18 unique variations at Arellanes’ palenque. The spirits were stored in a variety of large plastic containers, garafones, with their names handwritten on masking tape. 

Large plastic containers holding different types of mezcal

Be warned! You could be sampling over 12 types of mezcal at each stop!

Experiencing this process in person was an eye-opening experience and gave me incredible appreciation for the amount of work involved in producing mezcal. It’s made by hardworking human hands, and the maker wants every batch to be as good as he can make it. He might not understand all the reasons, but he understands that inevitably no two are the same. Sure, there are some smoky types, but there are also ones with herbaceous, savory or woody notes. 

For that, you see, is one of the beauties of mezcal — and why Alvin says it’s akin to scotch — there’s always a variability from batch to batch. –Duke